Linea Ipar - Aureolato Policromo

Previous Next

Aureolato Policromo<BR />ARP 1P1

ARP 1P1

The AURELATO POLICRIMICO is a definitely original and modern material for floorings with no comparioson with traditional materials.

Characterized by a strong chromatic brightness of the round-shaped decorations giving to it a pleasantly modern and happy and at the same time elegant look, it is one option of the AUR series maintaining its high wear resistence and easiness of cleaning.


Also the AUREOLATO POLICROMO is specially suited for floorings of spaces with a heavy traffic (shopping malls, supermarkets, department stores, shops, schools, offices, hotels, restaurants, ect.).

Laying and polishing. They are undertaken using the same procedure and using the same machines, abrasives and products usually used on good quality marble. We advise initial rubbing down with coarse grain abrasives, followed by floor grouting treatment. For this purpose we supply coloured cement matching the base colour. Where oil and non-acid substance proofing is required after laying the floor it is possible to apply an impregnation treatment using water and oil repellant products normally available on the market. Follow the manufacturer's instructions as concerns the use of the impregnation substances.

The following items can be produced: SKIRTING 30-40 x 7 cm., thickness 1.3 cm. approx., cut from the tiles TREADS and RISERS for steps, “L” SHAPED STEPS, DOORSTONES, WINDOW SILLS and SLABS with a minimum thickness of 4 cm.
Due to the different production techniques used these items may vary in colour as compared to the tiles.

The correspondence of our materials to the samples and catalogues must be considered as indicative.