Linea Ipar - Aureolato a Tappeto
Aureolato a Tappeto<BR />ART 321
AUREOLATO A TAPPETO, is a flooring material of totally original and modern aspect, which has no comparison to traditional materials.
It is a variant of the AUR series, with a different combination of rounded multicoloured patterns, providing the designer with new interior design solutions. The wear- resistance potential is comparable with that of the LITOMARMO AUREOLATO version and is therefore very high. This flooring is also easy to clean.
AUREOLATO A TAPPETO is also particularly suited to the flooring of premises with a heavy walking traffic(shopping centres, supermarkets, dept. stores, schools, offices, hotels, restaurants etc).
Laying and polishing. They are undertaken using the same procedures and the same machines, abrasives and products usually employed on good marble. After initial rubbing down with coarse grain abrasives we advise to proceed with grouting of the floor. We are therefore supplying coloured cement to match the base colour. Where oil and non-acid substance proofing is required, after laying the floor it is possible to apply an impregnation treatment using water and oil repellant products normally available on the market. Follow the manufacturer's instructions as concerns the use of the impregnation substances.
Manufactured goods in AUREOLATO A TAPPETO.
The following items can be produced: SKIRTING 30-40 x 7 cm., thickness 1.3 cm. approx.,cut from the tiles.
TREADS and RISERS for steps, DOOR STONES, WINDOW SILLS and SLABS with a minimum thickness of 4 cm.
Due to the different production techniques used these items may vary in colour as compared to the tiles.
The correspondence of our materials to the samples and catalogues must be considered as indicative.